Pulnix TS-9720EN Series Manuale di Installazione Scaricare il pdf (Pagina 105)

Page 93

VIS CAM 300/400 Installation Manual

Appendix E: Moxa N-Port 5232 Configuration

9 Appendix E: Moxa N-Port 5232 Configuration

Configuration of the Moxa N-Port server is done through a standard web-browser or using Telnet.

If you are unfamiliar with the configuration terms, please consult the enclosed Moxa N-Port server

manual.

To carry out the configuration using Internet Explorer, type the IP-address of the unit in the address

field:

http://192.168.127.254

<CR>

You should now be able to configure the unit through the embedded web-server.

To carry out the configuration using Telnet, open the command prompt window – type the following:

Telnet 192.168.127.254 <CR>

You should now be able to configure the unit through the Telnet interface.

The necessary settings will be listed under its designated sub-menu. The items underlined in bold italics

(example - Delimiter: D

) must be configured as described.

Basic Settings:

Server name: Enter the desired name for the N-Port server.

Time zone: Enter the correct time zone for the system location.

Local time: Enter the correct time for the system location.

Time server: Enter IP-Address or domain name for the desired time server.

Web console: Enables / Disables the web configuration utility.

Telnet console: Enables / Disables the Telnet configuration utility.

FIGURE 87. Standard configuration of Basic Settings:

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 115 116

Nessun commento

Pulnix TS-9720EN Series Manuale di Installazione Pagina 105